Weatherproof and Weatherproof UHD Camera Systems

The Camera Corps Weatherproof Beauty Camera System has been successfully used all over the world.

The Camera Corps Weatherproof Camera System has been successfully used all over the world.

The latest versions of Camera Corps Weatherproof and Weatherproof UHD Camera Systems provide a full environmental housing, large enough to accommodate a wide angle broadcast lenses and high performance cameras, such as the Hitachi DK-H100 or Panasonic AK-UB300. It also includes windscreen washing and wiping as well as a built in cooling and heating system for reliable operation in all climates.

The Weatherproof and Weatherproof UHD Camera Systems use a SMPTE 3K fibre connection, carrying camera video, genlock, data and power. This works in conjunction with a Camera Corps ‘Simply SMPTE and SMPTE MAX’ base end units to provide up to 3km of operation over a single SMPTE 3K cable.

The P&T head has motor brakes for both the pan and tilt motors and when the head is not powered the brakes are automatically set to the ‘ON’ position to maintain physical stability.

All these features make the system very robust and perfectly suited for situations where the camera is located in exposed and sometimes inaccessible positions needing total protection from the elements. Full control of the camera is possible via our RCP Panel, allowing complete control of up to 6 cameras. Where a remote head is also required, the RCP Panel is used in conjunction with Camera Corps’ smooth and accurate Joystick Control. Up to 8 remote heads of different types can be operated from one Joystick Control. Camera functions and PTZF data are sent via a standard 3-pin XLR cable.

Technical

Weatherproof Housing Specifications
Temp. Range -25°C to +55°C
Protection IP68
Power for integral self park wiper 24V DC
Dimensions (mm) Height 258, Width 235, Length 761
Weight 6.4kg

Weatherproof Pan & Tilt Specifications
Max Load Side mount format  – 50kg
Top mount format – 20kg
Power 24V DC
Brakes Pan: 30
Tilt: 10
Pan / Tilt Speed (°/sec) -25°C to +55°C
Protection IP68
Size (mm) Side mount: 235 (H) x 221 (W) x 171 (D)
Top mount 251 (H) x 231 (W) x 171 (D)
Weight 12kg

Hitachi DK-H100 Specifications
Image sensor 3 x 2/3″ 2.3 M pixels IT-CCD
Aspect 16:9 (HD/SD), 4:3 (SD) switchable
Scan Format 1080/59.94i, 1080/50i, 480/59.94i, 576/50
Horizontal Resolution 1100TV lines Y out

Panasonic AK-UB300 Specifications

Power Supply DC 12V (DC 11 V ~ 17 V)
Operating Temperature -10°C to 45°X (14°F to 113°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
Weight Approx. 1.6kg (3.52 lb)
Dimensions (W x H x D) 110 mm x 141 mm x 160 mm, (4-11/32 inches x 5-9/16 x 6-5/16 inches)
(excluding protrusions)

Image Sensor 11 million pixels MOS x 1
Lens Mount 2/3 type-bayonet
ND Filter CLEAR, ¼, 1/16 , 1/64
Gain -6, -3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36 dB
Frame Mix 6, 12, 18, 24 dB
Sensitivity [NORMAL MODE]
F6 (2000 lx, 3200 K, when white reflectivity is 89.9%, 1080/59.94i)
F7 (2000 lx, 3200 K, when white reflectivity is 89.9%, 1080/50i)
[HIGH SENS MODE]
F10 (2000 lx, 3200 K, when white reflectivity is 89.9%, 1080/59.94i)
F11 (2000 lx, 3200 K, when white reflectivity is 89.9%, 1080/50i)
S/N 60 dB typ. (DNR ON)
Horizontal Resolution
HD: 1000TV lines or above (center)
UHD: 1800TV lines or above (center)

Sychronization system Internal and external synchronization (Tri-level STNC/Black Burst)
Digital Extender 2x
HD Cut-out 3 memories
Digital Haze Clear ON/OFF
FBC ON/OFF
Focus Assist In RED, In GREEN, BAR, MAG (x2)
Scan Reverse H, V, H+V
IP Streaming H.264, MUEPG
Control IP, Serial
Interface Video
HD SDI OUT1 BNC x 1 3G/1.5G HD SDI:0.8 V [p-p], 75 Ω
HD SDI OUT2 BNC x 1 3G/1.5G HD SDI:0.8 V [p-p], 75 Ω
UHD/HD SDI OUT1 BNC x 1 3G/1.5G HD SDI:0.8 V [p-p], 75 Ω
UHD/HD SDI OUT2 BNC x 1 3G/1.5G HD SDI:0.8 V [p-p], 75 Ω
UHD/HD SDI OUT3 BNC x 1 3G/1.5G HD SDI:0.8 V [p-p], 75 Ω
UHD/HD SDI OUT4 BNC x 1 3G/1.5G HD SDI:0.8 V [p-p], 75 Ω
Other
GENLOCK IN BNC x 1, 1.0 V [p-p], 75 Ω
I/F D-SUB 15pin
LAN 1000 Base-TX/10BASE-T
TALLY OUT 4pin
IRIS 12pin
ZOOM/FOCUS 12pin
DC IN XLR x 1, 4pin, DC12 V (DC 11 V ~ 17 V)